Set up your Pulse

KORVIXPulse · Wi-Fi setup

Set up
your Pulse.

Home Wi-Fi in about a minute. Keep this page open while you go.

Clock's Wi-Fi name
Clock-Setup-…
Password
shown on the clock screen
1

Join the clock's Wi-Fi

Open your phone's Settings → Wi-Fi and tap Clock-Setup-….

2

Type the password

Paste or type the password from the clock screen, then tap Join. If your phone says "No internet", that's normal: choose to stay connected.

3

Come back here and open the setup

Once your phone is on the clock's Wi-Fi, tap the button. (Sometimes the setup page also pops up by itself.)

Open clock setup →

Or type 192.168.4.1 into your browser's address bar.

4

Pick your home Wi-Fi

Tap your home Wi-Fi, type its password and tap Connect. The clock shows CONNECTED! and the time appears.

Something not working?

  • Can't find the Clock-Setup Wi-Fi? The clock closes it after 15 minutes. Tap Start again on the clock (or Settings → Wi-Fi) and scan the new code.
  • The button doesn't open anything? Check your phone is still on the clock's Wi-Fi, not on mobile data. On Android, turn mobile data off for a moment.
  • Your home Wi-Fi isn't listed? The clock needs 2.4 GHz Wi-Fi. Most routers have it; tap "My Wi-Fi isn't listed" to type the name.
  • Wrong password? The clock says so; just try again.